Amigurumi, Amigurumi Dog, Amigurumi Free Patterns

Amigurumi Puppy Dog Free Crochet Pattern

– This description is an authoring.

– The publication of the description on any resources can be carried out by providing

document. Copying the description text and publishing is undesirable.

– When publishing works related to this description, please indicate the author of the description.

I would be very grateful for observing the three above points пунктов

Materials:

– Yarn for toys beige, brown, pink, black, yellow, blue, green, white

colors. I used Vita Brilliant beige, blue and green (45% wool, 55% acrylic, 380

m / 100 g), Trinity Dream yellow, pink, brown and black colors (70% wool, 30%

bamboo, 180 m / 50 g).

– Yarn for the eyes of white, black, green colors. I used iris kirovsky.

– Hooks that fit your yarn.

– Thick cardboard for insoles in shoes. Or any other dense material.

– Wire, in case you will make a toy on the frame. It took me 80 centimeters.

When using yarn with the specified meter, the height of the toy is about 20 cm.

Abbreviations Used:

– sc – single crochet;

– dec – decrease;

– inc – increase;

– sl-st – slip-stitch

– dc – double crochet

– hdc –half double crochet

– ch – chain

PATTERN

The toy is knitted in a spiral (except ears, bangs and a speck on the eye). When using a marker

while knitting, his position is not necessary to monitor. It is only needed into magic ring.

designations of the beginning of a row.

Head

Knit beige yarn

1 6 sc into magic ring 6

2 6 inc 12

3 (1 sc, inc) * 6 18

4 (2 sc, inc) * 6 24

5 (3 sc, inc) * 6 30

6 (4 sc, inc) * 6 36

7 (5 sc, inc) * 6 42

8 (6 sc, inc) * 6 48

9-16 48 sc (8 rows) 48

17 17 sc, 2 dec, 6 sc, 2 dec, 17 sc

We put a marker on the place of the decreases. There will be eyes. 44

18-20 44 sc (3 rows) 44

21 20 sc, 4 inc, 20 sc 48

In this row at the site of increases will be located

upper nose

22 8 sc, inc, (3 sc, inc) * 2, 14 sc, inc, (3 sc, inc) * 2, 8 sc 54

23 8 sc, inc, (4 sc, inc) * 2, 16 sc, inc, (4 sc, inc) * 2, 8 sc 60

24-25 60 sc (2 rows) 60

26 13 sc, dec, 4 sc, dec, 6 sc, dec, 2 sc, dec, 6 sc, dec, 4 sc, dec, 13 sc 54

27 12 sc, dec, 4 sc, dec, 5 sc, 2 dec, 5 sc, dec, 4 sc, dec, 12 sc 48

28 (6 sc, dec) * 6 42

29 42 42

30 (5 sc, dec) * 6 36

31 (4 sc, dec) * 6 30

32 (3 sc, dec) * 6 24

33 (4 sc, dec) * 4 20

34-35 20 sc (2 rows) 20

36 20 sc 20

We make the required amount of ch (I got 3) so that the beginning of the row moves to the middle

back of the head. You may find that the offset loops are not needed, or

will have to dissolve a couple of columns.

For a more even transition of the color of the offset loop, it is better to do not sc, but sl-st.

Stuff your head with filler.

Start knitting the torso

37 change to black thread 20 sc 20

38 20 sc, 2 sl-st 20

39 Change to the yellow thread (4 sc, inc) * 4 24

40 (1 sc, inc) * 12 36

41 (5 sc, inc) * 6 42

42-57 42 sc (16 rows) 42

58 42 sc for front half loops 42

59 42 sc, sl-st, thread cut, hide 42

Knit panties

60 We knit blue thread for the back half loops 58 rows 42 sc 42

61-65 42 sc (5 rows) 42

Now fold the knitting in half so that the area of ​​the face is in front.

The beginning of the next row should be in the middle of knitting. For this we do the necessary

the number of offset loops, or dissolve a few columns (I needed 3 ch).

Insert the wire frame. Take a piece of wire, fold it in half and attach

shape as in the photo. If necessary, wrap the wire with adhesive tape or

molar tape.

The length of the wire is taken taking into account the length of the toy + a certain amount per foot. I have

the wire length was approximately 45 cm.

We stuff the carcass.

Next we will knit legs.

Remember to stuff the carcass as you knit.

Do not break the thread. Count back 21 loops. In the 21st loop we introduce a hook.

66 21 sc 21

67 (5 sc, dec) * 3 18

68-75 18 sc (8 rows) 18

76 We knit for the front half-loops (2 sc, inc) * 6 24

77 (3 sc, inc) * 6 30

78 30 sc, thread cut, hide 30

To tie the second leg, repeat from 66 to 78 rows.

After the pants are connected, we close the hole between the legs with the help of a thread with

a needle.

Boots 2 pcs.

We start with the sole, knit with white yarn.

1 Type 10 ch, then knit in a circle starting from

second from the hook loop. 8 sc, 3 sc in 1, 7 sc, 2 sc in 1 20

2 inc, 7 sc, 3 inc, 7 sc, 2 inc 26

3 1 sc, inc, 7 sc, (1 sc, inc) * 3, 7 sc, (1sc, inc) * 2

Cut out the insoles from cardboard under your sole.

Paste it at your convenience. I am this

did when the boot was fully tied. 32

4 For the rear half loops 8 sc, 3 hdc, 9 dc, 3 hdc, 9 sc 32

5 Change the thread to green. 7 sc, 4 hdc, 2 dec of dc, 1 dc, 2 dec of dc, 4 hdc, 8 sc 28

6 28 sc 28

7 9 sc, 4 dec, 11 sc 24

8 5 sc, (1 sc, dec) * 4, 7 sc 20

9 8 sc, 2 dec, 8 sc 18

10 18 sc, cut the thread, leave the tail for sewing, fill with filler 18

Now you need to attach the shoes to the body with a needle and left

the tip of the thread on the boot.

First you need to twist the wire in the shape of the insole.

It is more convenient to insert shoes and sew on one at a time.

Sew on, grabbing the boot loops and back half loops in the 76th row of legs.

Pens are available in two versions. The first option fits in two parts and is suitable for

frame toys, the second option is knitted as a single part and the handles can be attached to the body

thread mount. The second option is provided by Lena.

First option

Start knitting with beige yarn from your fingers. Necessary

tie 4 fingers.

1 5 sc into magic ring 5

2-3 5 sc (2 rows) 5

After the last finger is tied, the thread is not cut.

We knit in a circle, tying fingers to each other and

forming a pen. We connect three fingers, then we knit

fourth. For the right and left hand, we knit rows 6 and 7 along

in different ways.

4 2 sc of the first finger, 2 sc of the second finger, 4 sc of the third finger, 2 sc of the second finger 2 sc of the first finger. 12

5 12 sc 12

For the right handle

6 3 sc, 2 sc knitting a finger from the inside and the handle together, 7 sc 12

7 3 sc, 3 sc fingers, 7 sc 13

8 11 sc, dec 12

For the left handle

6 * 7 sc, 2 sc knitting a finger from the inside and the handle together, 3 sc 12

7 * 7 sc, 3 sc fingers, 3 sc 13

8 11 sc, dec 12

Change the thread to black.

9-18 12 sc (10 rows) 12

Cut the thread, hide

We knit the sleeves with yellow thread.

1 12 ch short to the ring, 12 sc 12

2-6 12 sc (5 rows) 12

7 Connect the sleeve to the rest of the hand. 12 sc capturing the front half loops of an already connected arm. 12

8 (2 sc, inc) * 4, sl-st, thread cut and hide 16

With a black thread in the first row of the yellow part of the sleeve, we knit the connecting posts, the thread

cut, leave the tip for sewing.

We make a wire frame. On the one hand we bend the wire and, if necessary

wrap with adhesive tape. We insert it and fill the handle with filler.

If it is more convenient for you to knit and stuff right away, then the frame must be made before knitting the handles.

It’s more convenient for me to fill the part after inserting the frame. For this I use tweezers.

Sew handles to the body.

To make the wire easier to enter the body, you can pierce through the needle

body in the place where the handles should be.

The second option.

This version of the handle fits with the formation of the elbow. To the 16th row we knit in the same way as in the first

option. Starting from the 16th row, we knit according to the following description:

Right knob

16 4 hdc, 8 sc for rear half loops 12

17 4 hdc, 1 sc, 5 sc for the front half loops 15 rows, 2sc 12

18 12 sc 12

19 12 sc, 4 ch, change the thread to yellow 12

20 (1 sc, inc) * 6 18

21 18 sc for rear half loops 18

22-23 18 sc 18

24 (1 sc, dec) * 6, fill with filler 12

25 6 dec 6

Pull the hole, hide the thread.

Attach the thread to the front half loops of the 20 row, knit 18 sc,

fasten the thread, hide the tip.

Left pen

16 2 sc, 4 hdc, 6 sc for rear half loops 12

17 2 sc, 4 hdc, 1 sc, 5 sc for front half loops 15 rows 12

18 12 sc 12

19 12 sc, 3 ch, change the thread to yellow 12

20 (1 sc, inc) * 6 18

21 18 sc for rear half loops 18

22-23 18 sc 18

24 (1 sc, dec) * 6, fill with filler 12

25 6 dec 6

Pull the hole, hide the thread.

Attach the thread to the front half loops of the 20th row, knit 18 sc, fasten the thread, tip

hide.

We attach the handles to the body.

The ears

It is necessary to link 4 parts. First we knit 2 pink details, then brown.

1 7 ch, starting from the second loop from the hook 6 sc, ch, turn knitting 6

2 inc, 4 sc, inc, ch, turn 8

3 8 sc, ch, turn 8

4 inc, 6 sc, inc, ch, turn 10

5 inc, 8 sc, inc, ch, turn 12

6-8 12 sc, ch, turn (3 rows) 12

9 dec, 8 sc, dec, ch, turn 10

10 10 sc, ch, turn 10

11 dec, 6 sc, dec, ch, turn 8

12 8 sc, ch, turn 8

13 dec, 4 sc, dec, ch, turn 6

14 6 sc, ch, turn 6

15 dec, 2 sc, dec, ch, turn 4

16 4 sc, ch, turn 4

17 2 dec, ch, turn 2

18 dec 1

After the brown part is tied, the thread is not cut. Knit in a circle, connecting pink

and brown details. 18 sc on the side, 6 sc on the bottom, 18 sc on the side, sl-st.

You can insert a wire frame in the ear if you want the ear to

keep fit. It is advisable to choose a thinner wire.

Bang. 3 different sized parts.

1 item

1 Knit beige thread in a circle. We dial 13 ch. We knit from the second from the hook loop 3 sc, 3

hdc, 2 dc, 3 hdc, 3 sc in 1 loop, 10 sc, 2 sc in the last loop, sl-st. We cut the thread

leaving the tip for sewing

2 Knit with a brown thread. We start with the first hdc of the previous row. 6 sl-st, 3 sc, (hdc, dc,

ch, dc, hdc) in one loop, 3 sc, 5 sl-st, cut the thread, hide it.

2 detail

1 Knit beige thread in a circle. We dial 12 ch. We knit from the second from the hook loop 3 sc, 2

hdc, 2 dc, 2 hdc, sc, 3 sc in 1 loop, 9 sc, 2 sc in the last loop, sl-st. We cut the thread

leaving the tip for sewing

2 Knit with a brown thread. We start with the second hdc of the previous row. 4 sl-st, 3 sc, (hdc, dc,

ch, dc, hdc) in one loop, 3 sc, 3 sl-st, cut the thread, hide it.

3 detail

1 Knit beige thread in a circle. We dial 11 ch. We knit from the second from the hook loop 2 sc, 2

hdc, 2 dc, 2 hdc, sc, 3 sc in 1 loop, 8 sc, 2 sc in the last loop, sl-st. We cut the thread

leaving the tip for sewing

2 Knit with a brown thread. We start from the first dc of the previous row. 4 sl-st, 2 sc, (hdc, dc,

ch, dc, hdc) in one loop, 2 sc, 3 sl-st, cut the thread, hide it.

A schematic representation of the first part is shown below.

Eyes

First we knit the brown part. Speck. 1 item.

1 Dial 4 ch. Starting from the second loop hook inc, 1 sc, inc. 5

2-7 5 sc, 1 ch lift, turn 5

8 Now we bind on the sides and top. 1 ch lift, on the side 6 sc; by

top of inc, 1 sc, inc; on the side 4 sc, 1 hdc, 1 dc, 1 half-column with

2 crochets. Cut the thread, leave the tip for sewing.

Now we knit a thinner thread. I have this iris. We need green, white and black

colors.

You can also use ready-made eyes, or make them from felt. As you wish.

White color 2 details

1 6 sc into magic ring 6

2 6 inc 12

3 (1 sc, inc) * 4, 2 sc, cut the thread, leave the tip for sewing.

Green color 2 details

1 10 sc into magic ring 10

Black color 2 details

1 6 sc into magic ring 6

Now you need to connect all parts of the eyes together. First we sew the black part to

green. Then green detail to white. It should be noted that we connect the green part to the white

not in the center, but on the side. Then a couple of stitches with white thread make a highlight on the eye.

You can also make a small contour around the white part with a brown thread.

Next, sew a speck. Then we sew the eyes. I don’t sew eyes, but stick them.

We embroider the eyebrows. Sew on ears, bangs. Embroider the nose. For nose it is advisable to take yarn

thicker. So the nose will be more voluminous. We embroider a mouth. We embroider a pattern on a sweater.

Leave a Reply

Your email address will not be published. Required fields are marked *